To	  run	an   authoritative   DNS   server,    modify
/cfg/$sysname/termrc  or  /cfg/$sysname/cpurc  (whichever is
appropriate) to	include	the following:

  ndb/dns -srR



     The flag -s allows	the DNS	server	to  answer  requests
sent  to  UDP  port  53.   -r  allows  ndb/dns	to  act	as a
resolver; -R causes ndb/dns to ignore recursive	 lookups  on
behalf	of remote systems. This	may help prevent DDoS ampli-
fication attacks.

     Note: You *must* run ip/ipconfig before running ndb/dns
(and  possibly other network services).	Otherwise, you might
see errors like:


  ndb/dns: can't read my ip address



     You will want to add your	records	 to  /lib/ndb/local,
similar	to the following:

sys=example	dom=example.com		  ether=f2b2b3daeb89
     ip=198.51.100.2  ipmask=255.255.255.0 ipgw=198.51.100.1
     ntp=pool.ntp.org			    dns=198.51.100.1
     auth=198.51.100.1	    authdom=example.com

dom=example.com	     soa=	    refresh=300	     ttl=300
     ns=ns1.example.com			  ns=ns2.example.com
     ip=198.51.100.2		    dnsslave=ns2.example.com
     mb=postmaster@example.com		 mx=mail.example.com
pref=5	    txt="v=spf1	mx -all"

sys=ns1	   dom=ns1.example.com	  ip=198.51.100.2    sys=ns2
dom=ns2.example.com	    ip=198.51.100.2	    sys=mail
dom=mail.example.com	   ip=198.51.100.2	  sys=_dmarc
dom=_dmarc.example.com	       txt="v=DMARC1;	     p=none"
dom=p9auth.example.com	    cname=example.com

dom=2.100.51.198.in-addr.arpa soa=	refresh=300  ttl=300
     ns=ns1.example.com	     ns=ns2.example.com


     Replace 198.51.100.1,  198.51.100.2,  example.com,	 and
postmaster@example.com with your actual	values.

NOTE: ndb may be sensitive to poorly  formatted	 whitespace.
If ndb is not recognizing your tuples properly,	double check
your whitespace.



		     November 23, 2024






			   - 2 -


NOTE: Make sure	to define your tuple for sys=example.com  in
/lib/ndb/local	right  after  the  definition for localhost,
before other tuples. Otherwise,	the  system  might  use	 the
wrong subnet mask, causing routing issues.

To refresh cs and dns after an update to /lib/ndb/local:


  echo -n refresh > /net/cs
  echo -n refresh > /net/dns


Suppose	you have a server example.com, and you want to dele-
gate subdomain.example.com.

In example.com,	you need to  have  something  like  this  in
/lib/ndb/local:


  dom=subdomain.example.com soa=delegated
      ns=ns1.subdomain.example.com
      ns=ns2.subdomain.example.com
      dom=ns1.subdomain.example.com ip=198.51.100.3
      dom=ns2.subdomain.example.com ip=198.51.100.4


Then, in subdomain.example.com,	add this to /lib/ndb/local:


  sys=ns1 dom=ns1.subdomain.example.com	ip=198.51.100.3
  sys=ns2 dom=ns2.subdomain.example.com	ip=198.51.100.4

  dom=subdomain.example.com soa=
	   refresh=300 ttl=300
	   ns=ns1.subdomain.example.com
	   ns=ns2.subdomain.example.com
	   ip=198.51.100.3
	   dnsslave=ns2.subdomain.example.com
	   mb=username@subdomain.example.com
	   mx=mail.subdomain.example.com
	   txt="v=spf1 mx -all"

  dom=3.100.51.198.in-addr.arpa	soa=
     refresh=300 ttl=300
     ns=ns1.subdomain.example.com
     ns=ns2.subdomain.example.com










		     November 23, 2024