ref: 974d424f44e33ba0f60e64a121cd749f87433899
parent: d932268783af23ecc38252e1613f7b62a66ecd21
author: jrmu <jrmu@cloud9p.org>
date: Mon Jul 29 08:42:59 EDT 2024
fixed formatting and updated for 10522 release of 9front
--- a/install.ms
+++ b/install.ms
@@ -490,88 +490,99 @@
$ doas vmctl start -c $USER
+host# vmctl start -c jrmu
+Connected to /dev/ttyp6 (speed 115200)
+MBR...pbs.................ok
+*e820=1 0x0000000000000000 0x000000000009f800 2 0x000000000009f800 0x00000000000a0000 2 0x00000000000f0000 0x0000000000100000 1 0x0000000000100000 0x000000007fffa000 2 0x000000007fffa000 0x0000000080000000 2 0x00000000f0000000 0x0000000100000000
+bootfile=9pc64
+bootargs=local!/dev/sdF0/fs -m 296
+mouseport=ask
+monitor=ask
+vgasize=text
+ccoonnssoollee==00
+bboooott
- Connected to /dev/ttyph (speed 115200)
- MBR...pbs.................ok
- *e820=1 0x0000000000000000 0x000000000009f800 2 0x000000000009f800 0x000000000
- 00a0000 2 0x00000000000f0000 0x0000000000100000 1 0x0000000000100000 0x0000000
- 03fffc000 2 0x000000003fffc000 0x0000000040000000 2 0x00000000fffc0000 0x00000
- 00100000000
- bootfile=9pc
- bootargs=local!/dev/sdF0/fs -m 192
- mouseport=ask
- monitor=ask
- vgasize=text
- ccoonnssoollee==00
-
- bboooott
-
-
- Plan 9
- 126 holes free
- 0x0001a000 0x0009f000 544768
- 0x0060a000 0x0ffff000 262098944
- 262643712 bytes free
- cpu0: 4623MHz GenuineIntel Xeon5000-series (AX 000206D7 CX 96982203 DX 079BA97
- F)
- ELCR: 02E8
- #l0: virtio: 1000Mbps port 0x2000 irq 5 ea de4baa668f07
- i8042: kbd init failed
- 1024M memory: 256M kernel data, 767M user, 1392M swap
- nusb/usbd: no hubs
-
- /dev/sd00: OpenBSD VMM CD-ROM 001
- /dev/sd00/data 9660
- /dev/sdF0:
- /dev/sdF0/9fat dos
- /dev/sdF0/data
- /dev/sdF0/fs hjfs
- /dev/sdF0/nvram
- /dev/sdF0/plan9
- bootargs is (tcp, tls, il, local!device)[local!/dev/sdF0/fs -m 192]
- user[glenda]:
- hjfs: fs is /dev/sdF0/fs
-
- init: starting /bin/rc
- ipconfig: write(try fe80::dc4b:aaff:fe66:8f07 /64): interface does not support multicast
- ipconfig: can't start IPv6 on /net/ether0, address fe80::dc4b:aaff:fe66:8f07
- ipconfig: dialicmp6: cs: can't translate address
- bind: #i: no frame buffer
- rio: can't open display: initdisplay: /dev/draw/new: '/dev/draw' file does not exist
- init: rc exit status: rc 260: rio 396: display open
-
- init: starting /bin/rc
- % auth/wrkey
- bad nvram des key
- bad authentication id
- bad authentication domain
- authid: glenda
- authdom: username.example.com
- secstore key:
- password:
- % 9fs 9fat
- % echo 'service=cpu' >> /n/9fat/plan9.ini
- % echo 'while() { sleep 5; ip/ping 38.87.162.1 > /dev/null } &' >> /bin/cpurc- % fshalt -r
-
-`~~.` to escape serial console, then:
+Plan 9
+125 holes free
+0x0001d000 0x0009f000 532480
+0x00100000 0x00110000 65536
+0x005df000 0x3365f000 856162304
+856760320 bytes free
+cpu0: 4600MHz GenuineIntel Xeon5000-series (AX 000206D7 CX 96982203 DX 079BA97F)
+ELCR: 02E8
+#l0: virtio: 1000Mbps port 0x2000 irq 5 ea f2b2b3daeb89
+i8042: kbd init failed
+2004M memory: 822M kernel data, 1181M user, 2431M swap
+bootfs: Sun Apr 28 01:34:12 GMT 2024
+fingerprint: eb2b47a2e2650e5348e2efa5bca9df39239a42c6
+nusb/usbd: no hubs
+/dev/sd00: OpenBSD VMM CD-ROM 001
+/dev/sd00/data 9660
+/dev/sdF0:
+/dev/sdF0/9fat dos
+/dev/sdF0/data
+/dev/sdF0/fs hjfs
+/dev/sdF0/nvram
+/dev/sdF0/plan9
+bootargs is (tcp, tls, il, local!device)[local!/dev/sdF0/fs -m 296]
+user[glenda]:
+hjfs: fs is /dev/sdF0/fs
+init: starting /bin/rc
+bind: #i: no frame buffer
+rio: can't open display: initdisplay: /dev/draw/new: file does not exist: '/dev/draw'
+init: rc exit status: rc 261: rio 391: display open
- host# vmctl stop username-plan9
- stopping vm username-plan9: requested to shutdown vm 6
- host# vmctl start -c username-plan9
-
+init: starting /bin/rc
+term% auth/wrkey
+bad nvram des key
+bad authentication id
+bad authentication domain
+authid: glenda
+authdom: example.com
+secstore key:
+password:
+confirm password:
+enable legacy p9sk1[no]:
+term% 9fs 9fat
+term% cd /n/9fat/
+term% cat plan9.ini
+bootfile=9pc64
+bootargs=local!/dev/sdF0/fs -m 296
+mouseport=ask
+monitor=ask
+vgasize=text
+console=0
+term% echo 'service=cpu' >> /n/9fat/plan9.ini
+term% echo 'while() { sleep 5; ip/ping 104.167.242.129 > /dev/null } &' >> /bin/cpurc+term% fshalt -r
+
+halting...hjfs: ending
+/srv/hjfs.cmd...
+done halting
+echo: write error: device or object already in use
+rebooting...
+cpu0: exiting
+Takes a licking and keeps on ticking...
+can't reset
.P2
+`~~.` to escape serial console, then:
+.P1
+host# vmctl stop username-plan9
+stopping vm username-plan9: requested to shutdown vm 6
+host# vmctl start -c username-plan9
+.P2
+
To start VNC (optional):
-
-
- # vncs -A /bin/rio -s
+.P1
+# vncs -A /bin/rio -s
+.P2
See also <http://cloud9p.org/doc/vmm.html>.