ref: 1620e222d8d4ade3c12f566bc3d689682a318e39
dir: /ndb-p9.ms/
.PP
To run an authoritative DNS server, modify /cfg/$sysname/termrc or /cfg/$sysname/cpurc (whichever is appropriate) to include the following:
.P1
ndb/dns -srR
.P2
.PP
The flag -s allows the DNS server to answer requests sent to UDP port 53.
-r allows ndb/dns to act as a resolver; -R causes ndb/dns to ignore
recursive lookups on behalf of remote systems.
.PP
Note: You *must* run ip/ipconfig before running ndb/dns (and possibly other
network services). Otherwise, you might see errors like:
.P1
ndb/dns: can't read my ip address
.P2
.PP
You will want to add your records to /lib/ndb/local, similar to the following:
sys=example dom=example.com
ether=f2b2b3daeb89
ip=198.51.100.2 ipmask=255.255.255.0 ipgw=198.51.100.1
ntp=pool.ntp.org
dns=198.51.100.1
auth=198.51.100.1
authdom=example.com
dom=example.com soa=
refresh=300 ttl=300
ns=ns1.example.com
ns=ns2.example.com
ip=198.51.100.2
dnsslave=ns2.example.com
mb=postmaster@example.com
mx=mail.example.com pref=5
txt="v=spf1 mx -all"
sys=ns1 dom=ns1.example.com ip=198.51.100.2
sys=ns2 dom=ns2.example.com ip=198.51.100.2
sys=mail dom=mail.example.com ip=198.51.100.2
sys=_dmarc dom=_dmarc.example.com txt="v=DMARC1; p=none"
dom=p9auth.example.com
cname=example.com
dom=2.100.51.198.in-addr.arpa soa=
refresh=300 ttl=300
ns=ns1.example.com
ns=ns2.example.com
.PP
Replace 198.51.100.1, 198.51.100.2, example.com, and postmaster@example.com with your actual values.
NOTE: ndb may be sensitive to poorly formatted whitespace. If ndb is not recognizing your tuples properly, double check your whitespace.
To refresh cs and dns after an update to /lib/ndb/local:
.P1
echo -n refresh > /net/cs
echo -n refresh > /net/dns
.P2
Suppose you have a server example.com, and you want to delegate subdomain.example.com.
In example.com, you need to have something like this in /lib/ndb/local:
.P1
dom=subdomain.example.com soa=delegated
ns=ns1.subdomain.example.com
ns=ns2.subdomain.example.com
dom=ns1.subdomain.example.com ip=198.51.100.3
dom=ns2.subdomain.example.com ip=198.51.100.4
.P2
Then, in subdomain.example.com, add this to /lib/ndb/local:
.P1
sys=ns1 dom=ns1.subdomain.example.com ip=198.51.100.3
sys=ns2 dom=ns2.subdomain.example.com ip=198.51.100.4
dom=subdomain.example.com soa=
refresh=300 ttl=300
ns=ns1.subdomain.example.com
ns=ns2.subdomain.example.com
ip=198.51.100.3
dnsslave=ns2.subdomain.example.com
mb=username@subdomain.example.com
mx=mail.subdomain.example.com
txt="v=spf1 mx -all"
dom=3.100.51.198.in-addr.arpa soa=
refresh=300 ttl=300
ns=ns1.subdomain.example.com
ns=ns2.subdomain.example.com
.P2