ref: 1620e222d8d4ade3c12f566bc3d689682a318e39
dir: /smtpd.ms/
Copy /bin/service/!tcp25 to /bin/service/tcp25. You may need to make some changes.
.LP
Make sure to chmod +x /bin/service/tcp25 or else the mail server won't be able to start
.P1
; cat /bin/service/tcp25
#!/bin/rc
#smtp serv net incalldir user
user=`{cat /dev/user}
exec upas/smtpd -e -f -r -s -n $3
.P2
If you have a certificate you have generated using acmed, you can enable StartTLS
with -c:
.P1
exec upas/smtpd -c /sys/lib/tls/acmed/example.com.crt -e -f -r -s -n $3
.P2
.LP
Note: the -c argument currently has a bug where it does not send the full chain of
the TLS certificate, so email clients that connect to it may report a certificate
validation error.
.LP
Make sure to edit /mail/lib/smtpd.conf:
.P1
#
# sample smtpd configuration options for inside connections
#
#
# replace example.com with the name of your domain
# replace 198.51.100.0 with the IP address range of your networks
defaultdomain example.com
norelay on
verifysenderdom off #disable dns verification of sender domain
saveblockedmsg off #save blocked messages
#
# if norelay is on, you need to set the
# networks allowed to relay through
# as well as the domains to accept mail for
#
ournets 198.51.100.0/24
ourdomains *.example.com
Copy /mail/lib/rewrite.direct to /mail/lib/rewrite, while replacing YOURDOMAIN.DOM with your actual domain name.
You will also want to edit /mail/lib/names.local for the users you want to handle mail for.
Edit /mail/lib/remotemail to add the -C -s flags to turn on TLS encryption when sending.
-C is needed in case some certificates don't validate properly:
#!/bin/rc
shift
sender=$1
shift
addr=$1
shift
fd=`{/bin/upas/aliasmail -f $sender}
switch($fd){
case *.*
;
case *
fd=example.com
}
exec /bin/upas/smtp -C -s -h $fd $addr $sender $*
Make sure to replace example.com with your actual domain name.
If you are logged in as a user other than the default hostowner (glenda),
make sure to add the users to upas group:
; echo 'newuser upas +$username' >> /srv/cwfs.cmd
Then create the user's mailbox:
; upas/nedmail -c
.P2
.LP
See dkim.ms guide for enabling dkim. Make sure to add spf and dmarc records as indicated in ndb.ms guide.
To test sending an email:
.P1
; upasname=sender@example.com upas/marshal -s 'Alpha Bravo Charlie' recipient@example.org
.P2
Type a message, then a newline, then EOF.
If your email address is simply $user, you may be able to omit the upasname variable provided the domain is correctly configured elsewhere.
To offer SMTP over TLS (submission port), we can no longer use /bin/service files, since
by default, it starts the process as user none.
Instead, we will start upas/smtpd from cpustart, and call aux/listen with -t.
cpu% mkdir /cfg/$sysname/service.upas
cpu% cp /bin/service/!tcp25 /cfg/$sysname/service.upas/tcp587
Then, we edit tcp587:
cpu% cat /cfg/$sysname/service.upas/tcp587
#!/bin/rc
user=`{cat /dev/user}
exec upas/smtpd -a -d -c /sys/lib/tls/acmed/example.com.crt -e -s -n $3
A line such as below must be added to /cfg/$sysname/cpustart to call service.upas:
auth/as upas aux/listen -p 128 -t /cfg/$sysname/service.upas
Warning: Calling auth/as may corrupt the namespace, and may require you later
to call mntgen /mnt.
Make sure to set the file as executable:
cpu% chmod +x /cfg/$sysname/service.upas/tcp587