ref: 453b9bd07592f8d40329b43971ab0ea3d419c6c4
dir: /rpi-wifi-p9.ms/
To enable wifi on a raspberry pi: If you did not already add the ethernet type to cmdline.txt before running Plan 9: % dossrv; mount /srv/dos /n/9fat /dev/sdM0/dos Use sam -d to edit /n/9fat/cmdline.txt: readparts=1 nobootprompt=local console='0 b115200' ether1=type=4330 Afterwards, reboot: % reboot To enable wifi: % bind -a '#l1' /net ether4330: chip 43430 rev 1 type 1 ether4330: firmware ready ether4330: addr b827eb2a85bf % aux/wpa -2 -s 'YOURESSID' -p /net/ether1 !Adding key: essid=YOURESSID proto=wpapsk password: ! % ip/ipconfig ether /net/ether1 % ip/ping -n 5 1.1.1.1 sending 5 64 byte messages 1000 ms apart to icmp!1.1.1.1!1 0: rtt 46712 µs, avg rtt 46712 µs, ttl = 56 1: rtt 27005 µs, avg rtt 36858 µs, ttl = 56 2: rtt 24841 µs, avg rtt 32852 µs, ttl = 56 3: rtt 22609 µs, avg rtt 30291 µs, ttl = 56 4: rtt 20432 µs, avg rtt 28319 µs, ttl = 56